奥迪是一家历史悠久的德国汽车制造商，其产品质量和性能备受赞誉。然而，即便是一款高性能汽车，也难免出现故障，尤其是空调故障。在本文中，我们将为您介绍奥迪空调故障代码列表，以帮助您对奥迪空调故障有更深入的了解。

P0010 - N283 - Left Heater Flap Motor (V158) or Right Heater Flap Motor (V159) - Motor Current max - The left or right heater flap motor has reached the maximum current. This can be caused by a defective motor, a damaged connector, or wiring issues.

P0011 - N282 - Fresh Air Blower Stage 1 (V166) - Motor Current max - The fresh air blower motor has reached the maximum current. This can be caused by a defective motor, a damaged connector, or wiring issues.

P0101 - G70 - Mass Airflow Sensor - Signal too low - The mass airflow sensor is not sending enough signal to the engine control unit (ECU). This could be because of a dirty or damaged sensor, a vacuum leak, or an issue with the wiring.

P0102 - G70 - Mass Airflow Sensor - Signal too high - The mass airflow sensor is sending too much signal to the ECU. This could be because of a dirty or damaged sensor, a vacuum leak, or an issue with the wiring.

P0321 - G28 - Engine Speed Sensor - No signal - The engine speed sensor is not sending a signal to the ECU. This could be because of a bad sensor or an issue with the wiring.

P0322 - G28 - Engine Speed Sensor - Signal too low - The engine speed sensor is sending a signal to the ECU that is too low. This could be because of a bad sensor or an issue with the wiring.

P0323 - G28 - Engine Speed Sensor - Signal too high - The engine speed sensor is sending a signal to the ECU that is too high. This could be because of a bad sensor or an issue with the wiring.

P0327 - G61 - Knock Sensor 1 (KS1) - Signal too low - The knock sensor is not sending enough signal to the ECU. This could be because of a bad sensor or an issue with the wiring.

P0328 - G61 - Knock Sensor 1 (KS1) - Signal too high - The knock sensor is sending too much signal to the ECU. This could be because of a bad sensor or an issue with the wiring.

P0411 - Secondary Air Injection System - Incorrect Flow Detected - The secondary air injection system is not functioning properly. This could be because of a clogged air filter, a damaged air pump, or an issue with the wiring.

P0440 - EVAP Emission Control System Malfunction - The EVAP system is not functioning properly. This could be because of a leaking gas cap, a damaged charcoal canister, or an issue with the wiring.

P0441 - EVAP Emission Control System Incorrect Purge Flow - The EVAP system is not purging correctly. This could be because of a clogged purge line, a damaged purge solenoid, or an issue with the wiring.

P0442 - EVAP Emission Control System Leak Detected (Small Leak) - The EVAP system has a small leak somewhere. This could be because of a damaged hose, a damaged gas cap, or an issue with the wiring.

P0443 - EVAP Emission Control System Purge Control Valve Circuit Malfunction - The purge control valve is not functioning properly. This could be because of a damaged valve, a damaged connector, or wiring issues.

以上是奥迪空调故障代码列表，每个故障代码都有不同的表达方式、结果、原因和处理方法。当您发现任何奥迪汽车的空调故障时，应该使用适当的诊断工具（如OBD-II故障码扫描仪）来确定故障代码，然后根据问题的来源进行维修或更换部件。方便快捷的排除故障将会帮助您节省时间和金钱，并且以最快的方式让您重新上路。

清洗项目